Lightboxes
Panier
alb4492564

Model of an Icebreaker, Polychromed block model of an ice breaker. It is a long pram with two wing-shaped extensions at the rear, on which capstans are placed, and with a large frame balancing on an axle in a chair on the front deck. The front part of the frame, which comes out in front of the fore ship, is provided with a heavy frame like an inverted roof, with a large number of ax heads placed on the ridge beams. The rear end of the balance reaches the rear deck, where it can be pulled down with a number of ropes, if the ropes are released, the front piece will fall down by its own weight and break the ice. This can also be done with the capstans, but these were used most for locomotion, the icebreaker was also hunted by horses or manpower. A hunting mast has been placed against the advance of the bucket, with a race ring to the top. At the stern of the praam is a rudder, Noordhollandsch Kanaal, anonymous, Netherlands, c. 1750 - c. 1807, wood (plant material), brass (alloy), rope, h 39.5 cm × w 99 cm × d 49 cm.

Model of an Icebreaker, Polychromed block model of an ice breaker. It is a long pram with two wing-shaped extensions at the rear, on which capstans are placed, and with a large frame balancing on an axle in a chair on the front deck. The front part of the frame, which comes out in front of the fore ship, is provided with a heavy frame like an inverted roof, with a large number of ax heads placed on the ridge beams. The rear end of the balance reaches the rear deck, where it can be pulled down with a number of ropes, if the ropes are released, the front piece will fall down by its own weight and break the ice. This can also be done with the capstans, but these were used most for locomotion, the icebreaker was also hunted by horses or manpower. A hunting mast has been placed against the advance of the bucket, with a race ring to the top. At the stern of the praam is a rudder, Noordhollandsch Kanaal, anonymous, Netherlands, c. 1750 - c. 1807, wood (plant material), brass (alloy), rope, h 39.5 cm × w 99 cm × d 49 cm.
Partager
pinterestPinterest
twitterTwitter
facebookFacebook
emailEmail

Ajouter à une autre Lightbox

Ajouter à une autre Lightbox
add to lightbox print share
Avez-vous déjà un compte? S'identifier
Vous n'avez pas de compte ? S'inscrire
Acheter cette image
Chargement...
Légende: Voir la traduction automatique
Model of an Icebreaker, Polychromed block model of an ice breaker. It is a long pram with two wing-shaped extensions at the rear, on which capstans are placed, and with a large frame balancing on an axle in a chair on the front deck. The front part of the frame, which comes out in front of the fore ship, is provided with a heavy frame like an inverted roof, with a large number of ax heads placed on the ridge beams. The rear end of the balance reaches the rear deck, where it can be pulled down with a number of ropes, if the ropes are released, the front piece will fall down by its own weight and break the ice. This can also be done with the capstans, but these were used most for locomotion, the icebreaker was also hunted by horses or manpower. A hunting mast has been placed against the advance of the bucket, with a race ring to the top. At the stern of the praam is a rudder, Noordhollandsch Kanaal, anonymous, Netherlands, c. 1750 - c. 1807, wood (plant material), brass (alloy), rope, h 39.5 cm × w 99 cm × d 49 cm
Crédit:
Album / quintlox
Autorisations:
Modèle: Non - Propriété: Non
Questions sur les droits?
Taille de l'image:
7146 x 4290 px | 87.7 MB
Taille d'impression:
60.5 x 36.3 cm | 23.8 x 14.3 in (300 dpi)
Mots clés: